2016年8月16日火曜日

ココが知りたい No.1 D6 (6) root化完了



ちす。

xda のNo.1 D6 フォーラム 57Pageにroot化方法が投稿されている。

MTK FlashTool/ADB/USB Driverの環境が揃っていれば、TWRP(カスタムリカバリー)を焼いて、SuperSUのzipをTWRPでインストールするだけだ。

注意点は2点。
・FlashToolでTWRPを焼くとき、TWRPのアーカイブに同胞されているscatterファイルを指定する。
・ボリュームキーが無いのでD6単体ではリカバリーモードで起動できない。PC側から"adb reboot recovery"を実行しD6を起動する。

D6に残された問題は、サービスON/OFF不可問題だけだ。

How to install the Modified recovery images and then root the NO1 D6
Quote:
Originally Posted by skassam546 
Sorry. Noob here. You installed TWRP, then installed the Q1 Rom, then rooted the Q1 ROM?
No worries about being a Noob. We all start to learn somewhere. I am no longer using the Q1 rom. 

Step by step with the D6 rom to install the modified recovery, system partition and then root---

1. Download https://goo.gl/lxbON4 and http://forum.xda-developers.com/atta...3&d=1469465718
2. Extract all the zip files to a folder that you can find.
3. Open the 20160716 folder and then open the drive folder and execute InstallDriver.exe
4. Power off your NO1 D6.
5. Connect the charging cable to the computer
6. Attach the charging cable to the watch and verify that the device is detected by the computer (device will only stay in bootloader (MTK USB) for a few seconds and then show as unrecognized device)
7. Open the SP_Flash_Tool_exe_Windows_v5.1524.00.000 folder and execute flash_tool.exe
8. Click the "Scatter-loading" button and point to the scatter file in the w602_wgl.D6.Foreign.80.emmc.w.s.160716.flash folder.
9. Click Download
10. Remove the charging/sync cable from the back of the device and then reattach. The flash should start now and you will see a red to yellow to green progress bar at the bottom of the Smart Phone Flash Tool application with a transfer speed. (If the transfer does not start immediately make sure the device is powered off, driver is installed, USB chipset drivers are up to date and try another USB port until the flash image starts to transfer)
11. Do not power on the device.
12. Click the "Scatter-loading" button again in the flash tool and select the scatter file in the D6-TWRP_302-recovery-20160716 folder.
13. Repeat Steps 9 and 10.
14. Power on and set up the device.
15. Open Google Play application and sign into Google and give the device atleast 15 minutes to sync your account on a Wifi connection (so your device will not have issues downloading applications)
15. Download Snoop05's ADB 15 second installerhttps://drive.google.com/open?id=0B0...VB1elljU2NPR0k
16. Go to the settings menu (on the D6) and then select about equipment and tap on the build number 6 to 7 times until the system informs you that you are now a developer.
17. Go to the newly unlocked developer options menu in settings and check the box to enable USB debugging.
18. From a Windows command prompt (Windows key + R, then type cmd and press ok) type adb devices.
19. Accept the authorization from the computer on the smart watch and remember the authorization always.
20. Open up the D6 under Windows Explorer and browse to the root of the device.
21. Download Supersu.zip (https://download.chainfire.eu/696/Su...etrieve_file=1) and copy to the root of the D6.
22. In your command prompt type adb reboot recovery
23. Once your device boot's into teamwin touch recovery press install and then scroll to the bottom of the directory and select the supersu zip file that you just copied over.
24. Press the play symbol to start installation and then slide to install.
25. Once installed reboot your device and allow it to start up.
26. Visit the play store and Install Supersu and allow it to update the binary through TWRP, your device will then restart and once it boots it should now be rooted.

Use this information at your own risk, there may be errors or problems in my instructions but if this helps you please press the thanks button.

Credit goes to all the people who made this possible. Cyrux75, Stickypinkyfinger, pablo11, Chainfire, Snoop05, NO1 D6 and many others that I am not aware of.
The Following 4 Users Say Thank You to holdmyheadwhileipuke For This Useful Post:[ View ]


0 件のコメント:

コメントを投稿